home *** CD-ROM | disk | FTP | other *** search
/ The World of Computer Software / The World of Computer Software.iso / f15tip.zip / F15MON.DOC < prev    next >
Text File  |  1992-12-23  |  3KB  |  64 lines

  1.  
  2. F15MON.DOC                        F-15 III                  22 December, 1992
  3.  
  4. The program F15MON.EXE is shipped with F15 Strike Eagle III to assist in
  5. establishing connections between computers for modem play.
  6.  
  7. F15MON must be run at the same time on both computers you are trying to
  8. connect.  When you run F15MON you see the following message:
  9.  
  10.     F15MON.EXE : F15 Strike Eagle III  COM port monitor version 1.3
  11.     Copyright (c) 1992 by MicroProse Software, Inc., All Rights Reserved
  12.  
  13.     COM Port (1 or 2)> _
  14.  
  15. Enter the number of the COM port where your modem or null-modem is attached.
  16. You are then prompted for baud rate:
  17.  
  18.     BAUD Rate (1: 2400  2: 4800  3: 9600  4: 19200  5: 38400)> _
  19.  
  20. Enter 1 - 5 for your selection.  The computers can use different COM ports
  21. based on their hardware configurations but both machines MUST select the
  22. same baud rate.
  23.  
  24.  
  25. FOR DIRECT (NULL-MODEM) CONNECTIONS:
  26. Once both COM Port and BAUD Rate prompts have been answered, both computers
  27. should be connected.  Anything typed on the keyboard of one machine should
  28. appear on the display of the other.  Press the Esc key at any time to exit
  29. F15MON.
  30.  
  31. Trouble shooting:
  32. Test all cables and plugs for good connections.
  33. If you have a mouse:
  34.     If everything you type is echoed back to you or if moving your mouse
  35.     displays garbage characters on your screen then you have selected the
  36.     COM port that your serial mouse is using.  Select the the other COM port.
  37.  
  38. When both computers are communicating with each other you are ready to link
  39. up through the game.  Make sure the COM port and baud rate selections you
  40. make in the game are the same as selected for the F15MON program.  The game
  41. selections may be made from the INSTALL program or from the menu at the top
  42. of the HOME or HANGAR screen of the game.  From INSTALL's main menu select
  43. "Reconfigure Hardware Options" and advance to the "Modem/Direct Connect
  44. Default Configuration" screen.
  45.  
  46.  
  47. FOR MODEM CONNECTIONS:
  48. Once both COM Port and BAUD Rate prompts have been answered, you should
  49. be able to communicate with your modem.  If your modem is properly connected,
  50. anything you type should be echoed back to you.  Type "ATZ" followed by the
  51. Enter key to initialize your modem.  If your modem responds with "OK" then
  52. you are properly connected.  At this point, type "ATE" followed by Enter
  53. to place your modem in no-echo mode.  You are now ready to dial the modem
  54. connected to the other computer.  Type "ATD" followed by the phone number
  55. followed by Enter.  When dialing is completed, the the F15MON program running
  56. on the receiving computer will display the word "RING".  At this time type
  57. "ATA" on the receiving computer to answer the call and complete the modem
  58. connection.  Both computers should display the word "CONNECTED" when the
  59. connection is complete.  This may take 15 seconds to a minute.  Once you
  60. have confirmed the connection through this method you are ready to connect
  61. through the game.  Turn both modems off then on to hang up and run the game
  62. to re-establish communications.  Read the section above on DIRECT CONNECTIONS
  63. for more information.
  64.